The Differences Between Brake Shoes vs Brake Pads

All automobiles have a braking system, which contains either brake shoes or pads. Depending on the type of vehicle, it may have a drum or disc brake system. Brake shoes are a part of the drum brake, while pads belong to the disc brake. Is there any disparity between brake shoes vs brake pads?

ALLMAX contains other products and information you need, so please check it out.

Basically, both these components do the same thing&#;slowing down and stopping a vehicle&#;although their design and working mechanism are slightly different from each other. We&#;re going to discuss how they differ while doing the same thing.

Brake Shoes vs Brake Pads: The Differences

In a disc brake, the pads exert pressure on the rotor (a rotating disc) to slow down the vehicle and stop it. The brake shoes do the same job in a drum brake, but by applying pressure on a cylindrical rotating unit.

Modern vehicles have a disc braking system, while the brake shoes are a part of old vehicles. Drum brakes have been used since the invention of automobiles, but the disc system was a later invention, making its debut toward the end of the nineteenth century.

The main points of difference between brake pads and shoes are:

Placement

The front-wheel axle is the place where the brake pads lodge. But brake shoes are placed in the rear axle, so you will never find a drum brake in a front-wheel-drive car.

In fact, disc brakes can be found in four-wheel-drive vehicles too (where each of the four wheels uses a disc brake) but you will never find drum brakes in a front-wheel-drive car.

SEE MORE

Efficiency

Brake pads are better than brake shoes for stopping a vehicle because they are more heat-resistant and keep frictions away from the disc. They respond well in tricky conditions, like wet and snowy surfaces.

Brake pads are more heat resistant, which makes them perfect for the front axle of vehicles. Because of this, brake pads have a longer lifespan than brake shoes.

Replacing the brake pads is easier than brake shoes. Anyone with general mechanical knowledge can change the defected pads at home.

Durability

Both the pads and shoes are made of steel with one side having a layer of frictional material. However, brake pads last longer than brake shoes because of their excellent resistance to heat. The brake shoes have one advantage though, as they can be recycled.

Cost

The only downside of the pads in this brake shoes vs brake pads comparison is the cost. Brake shoes are less expensive because they are recyclable into new shoes or other automotive parts. A new brake pad costs almost half as a new brake pad.

Remember that you cannot use both drum and disc braking systems together in a vehicle. So, if you want to buy a second-hand vehicle, don&#;t forget to inquire about the braking system. You may not want to deal with the less efficient and less durable brake shoes.

Contact us to discuss your requirements of Brake Lining exporter. Our experienced sales team can help you identify the options that best suit your needs.

The advancement in technology has brought about several transformations in braking systems in the automotive industry. A braking system is just as essential for any mechanical device/system as any other component. With the variety of performance requirements, several braking systems have come into being&#;disc and drum brakes being among them. Brake disc suppliers in India look forward to a growth of 3.2% of the brake disc market between and &#;as the demand for commercial cars increases. Robust drum brakes market trends too look equally pleasing for manufacturers. 

Knowing The Function Of Braking Systems 

For proper functioning of mechanical devices or any automobile machinery, a functioning braking system is also important. So what exactly does a brake do and how do they work?

A brake system employs friction against the component that is in motion to bring the movement to a stop. Brake disc and brake drum manufacturers in India define that&#; both the braking systems bring the moving wheel to a halt by converting kinetic energy into heat energy. 

Drum Brakes vs. Disc Brakes

When it comes to braking systems for passenger cars, disc brakes and drum brakes are the two primary types. Although the function of both the brakes are same, the design and operations differ. 

• Installation &#; Disc brake systems have several components like brake pads, callipers, rotors, hydraulic fluid line and hydraulic fluid storage. On the other hand, drum brake systems typically include brake drum, brake shoes, wheel cylinders, anchor plate, adjuster, return springs, fastening as well as actuating elements. Since there are fewer components in the disc brake system, installation-wise, it is comparatively easier in comparison with drum brakes.
• Position &#; In many countries, the only kind of brakes present on cars&#; front wheels are disc brakes, as well as on all four wheels. Drum brakes are mostly found on the rear of passenger vehicles. Because of better stopping power, disc brakes have replaced drum brakes&#; even though drum brakes are still in use.
• Performance &#; Both disc brakes and drum brakes were introduced roughly around the same time. However, disc brakes took a while before it gained confidence and became practical enough to be used in the automotive industry.
  One of the first market leaders to identify and differentiate the performance of disc brakes over drum brakes was Jaguar. The company also sold a vehicle with disc brakes in the same year when they figured that a race car with disc brakes had outperformed cars with drum brakes.
  Moreover, drum brakes have the reputation of slipping or grabbing, unlike disc brakes&#; making disc brakes preferable for wet conditions/weather.
• Cost &#; Drum and disc brakes use different components to function and naturally, they differ in terms of cost and pricing. Drum brakes are less expensive than disc brakes, and the price of a new car reflects this cost differential. An automobile with disc brakes on both front and rear wheels costs more than one with disc brakes on the front wheels and drum brakes on the back&#; even though the rest of the components are kept the same. Additionally, as per brake drum manufacturers

  in

  India

  ,

  manufacturing drum brakes is less expensive than disc brakes.

• Durability &#; Although the brakes function on the same principle, they have different lifespans. Drum brakes have a larger friction contact surface than a disc, which means they are subjected to fewer wear and tear. Drum brakes towards the back produce less heat too. Also, drum brakes automatically refill themselves, requiring less input force (like hydraulic pressure in disc brakes). These make drum brakes more durable than disc brakes.  Keep in mind that while the design and components do affect the longevity of the brakes, it also largely depends on the usage. So to increase the durability of brake parts it is very important to know how to Choose the right size brake disc for aumotive applications.
• Heat Dissipation &#; The build and design of drum brakes do not allow an exit way for the heat energy that is caused when the brakes are applied. Because they lack a way to cool off, drum brakes frequently overheat. This happens particularly when used in high-braking situations like travelling down a slope or even rapidly stopping while being at a high speed. On the other hand, disc brakes have a larger surface area to allow heat dissipation which allows the brake rotors to cool off quickly.  Brake disc suppliers

  in

  India

  recommend using disc brakes in automobiles which requires a higher braking power.

• Maintenance &#; Maintenance is essential for ensuring the performance of the brakes in automotive machines. Hence, both the braking systems require proper maintenance for effective functioning. Disc brakes, which have fewer parts and are exposed are easy to gain access to. However, disc brakes may require more maintenance than the drum brakes because of brake pad wear.

While both drum and disc brakes have their advantages and disadvantages, choosing them in automotive machines depends on the usage and expected efficiency. Crescent Foundry, one of the largest and prominent market leaders for automotive solutions,  caters to custom brake drums and brake discs (and other parts) of the highest industry standards.

If you want to learn more, please visit our website SAF Brake Pads for sale.